Hydraulic Girder Formwork System moveable by crane - TBS-K
Hydraulic Girder Formwork System - movable by crane - for manufacturing parallel and saddleback roof girders.
The "TBS-K" is a girder formwork unit in which the two separate formwork sides are positioned by means of a gantry crane along the base formwork onto the assembly profile stipulated by the construction site. Once the formwork elements have been set in place, they are positioned upright with hydraulic cylinders or rack and pinion jacks and locked together with an upper tie rod.
The upper chords are hooked into chord mountings that can be adjusted in height and a continuously variable adjustment of both height and inclination via spindles is possible in these lifting brackets.
The formwork mirroring of the upper and lower chords is achieved either with 21 mm shuttering boards or else, as an option, with prefabricated steel mirrors in the case of a standardised girder programme. Handy plug-in assembly devices facilitate and speed up these technical procedures with the formwork.
The lengths in this girder formwork system are manufactured according to demand. As a general rule, a 16.0 m core length is equipped with 4.0 + 2.0 m elements detachable on both sides. A standard length totalling 36.5 m has proved to be the optimum.
The standard production height is 2.0 m and upright heights of up to 3.5 m are possible according to need.
Further information you can find on our product data sheet 02 Girder Formwork moveable TBS-K